Page 627 - MISUMI Thailand Economy Series

Economy Series Product Overview Product Overview Economy Series
Sprockets Chains Sprockets Chains

QDifference in performance & specifications between Economy series and
vs Standard Type generic products on the market
Saving
Economy Series up to MISUMI standard product MISUMI Economy series Generic products
on the market
*
Sprockets / 91 % Sprocket Hardness HRC45 HRC40 HRC20
Chains Life Conversion of Sprocket Over 3 years Over 2 years Over 1 years

12 categories of Japanese Standard Type Chain Roller Hardness HRA75 HRA68 HRA42
and European Standard Type Chain Tensile Strength
(GB Reference 8.9KN) 12.5KN 9.3KN 7.4KN
More assured with complete set purchase Only Japanese Japanese Standard 25~80 Only European
Specification Model standard type 25~100 European Standard06B~20B standard type 06B~08B
Joint links can be purchased separately for high flexibility
* Economy series product is different in strength compared to the standard product, and at the same time the price drops significantly
* Products circulating on the market are similar products randomly purchased by our company from online or offline markets
* The test data are obtained through testing by our company, which are for reference only
QSprocket Strength Comparison
QCustomer Voice

Customer Generic products on the market * MISUMI Economy series
We purchased a set of 3/8" sprockets from company A and a set of 3/8" chains from Hardness 20HRC Induction hardening of toothed face
company B, but the engineer said they could not be installed due to mismatch. Serious wear of toothed face Hardness 40HRC or more
Later it was found that the chain pins were too short and the width was less than 5.7, so
the sprocket teeth failed to snap in. We had to go back to the market to find matchable
products, and it took 3 days, which was very time-consuming and labor intensive.
Easy to rust Abrasion
Customer Service Easy to get resistant
stuck Long life
At MISUMI, you can purchase complete sets of 06B sprockets/ chains,
eliminating the mismatch problem, and you can use them directly upon arrival.

* Generic products on the market, which make customers confused on usage
QMISUMI Economy series sprockets / chains with 9 categories of European
standard type and Japanese standard type are available to meet your QSprocket and chain fit comparison (Fit tolerance 0.03 to 0.08 means smooth fit) 6
design needs
Generic products on the market * MISUMI Economy series
QEuropean standard type (5 series)
The fit tolerance 0 to 0.024 is too small, causing poor fit Dimensions comply with GB standard
Sometimes tooth skipping occurs Fit tolerance is kept between 0.04 and 0.06 for smooth fitting Sprockets / Chains
Nominal Model 06B 08B 10B 16B 20B
Sprocket Number of Teeth 10~30 10~30 10~25 11~25 9~20
Chain Number of links 4 and more links are customizable

QJapanese standard type (4 series) Chains Sprockets /
P.621
Nominal Model 25 35 40 80
Sprocket Number of Teeth 16~40 9~40 9~40 9~21 Attachments
Chain Number of links 4 and more links are customizable Chains With

P.641
MISUMI Economy series sprockets and chains with the same nominal number can be used in combination.
* Cases of poor quality of products circulating on the market

622