Page 1195 - MISUMI Thailand Economy Series

Format Series Price Ratio Shipping Search Drawing Product Material Table Techinfo Others BD M D GM Format Series Price Ratio Shipping Search Drawing Product Material Table Techinfo Others BD M D GM
KW
KW
Title
Pict
Title
Pict
Name
Name
Date
Date
AK AK
M M
20,25 ALUMINUM FRAME
Series Slot Width 6: Series 20, 25 for
small coverings, small part racks...
When ordering, select Part Number and Values from Selection Steps 1~3.
Aluminum Frames 12Part Number - - 1000 Frames Aluminum
3L
NFS5-4060

20
P.1183 Standard 4-R1 10 40 10 (2-B-4) Components Expanded P.1183
2 10 ① Frame Length Quantity
Brackets / Corners / Sheet Metals / Connectors 4-φ4.2 1.5 8 8 20 ② NFS6-3030-2000-LCH 2 3 Sheet Metals / Connectors Brackets / Corners /
2
NFS6-3030-2000
③
NFS6-3030-1170
⑤
NFS6-3030-1940
P.1215 60 ④ NFS6-3030-740 3 6 P.1215
20 ⑥ NFS6-3030-1440 5 1
Nuts / Bolts Material Length Weight Section Area Cross Sectional Moment of Inertia ⑧ Brackets, Bolts, Nuts 4x13=52 Nuts / Bolts
⑦
NFS6-3030-1440-RDH-LDH
NFS5-4060
10
Clear Anodize
Quantity
NBLFSN6-C-SET
4
4
⑩
NSJ6
P.1243 A6063S-T5 50~4000mm 1.80kg/m 665mm 2 ℓ x 12.63×10 mm 4 ℓ y 27×10 mm 4 ⑨ NBLFSN6-SET 10 2 P.1243
Decorative Accessories Standard 8-φ4.2 40 10 10 (Description) Accessories Decorative
20
4-R1 10
②
Add a wrench access hole on one end
for Single Joint connections.
P.1258 20 ⑦ Add a D Hole to each end for Joint Nuts. P.1258
⑧
Add tapped holes on brackets for
panels. Also include the screw/nut sets.
Panel Fasteners / Panels / Door Sliding Slot Accessories 3.5 20 20 80 ⑨ to the side shown in the figure below. Door Sliding Slot Accessories Panel Fasteners / Panels /
In this example, a panel is mounted
(Surfaces except front right and bottom)
Top, bottom, and middle section
Clear Anodize
P.1262 NFS5-4080 10 ⑩ brackets include bolt/nut sets. P.1262
Single Joint Kits need with the extrusion
17 Material Length Weight Section Area Cross Sectional Moment of Inertia on ⑦ and ②. 17
A6063S-T5 50~4000mm 2.69kg/m 994mm 2 ℓ x 18.29×10 mm ℓ y 63.3×10 mm 4
4
4
4
Aluminum Frames / Related Accessories Q Hole Machining Details (D Hole, S Hole, M Hole) Related Accessories Aluminum Frames /
Ma chining direction of D, S, M holes differs depending on the frame shape and the number of slots.
(Note 1) For the D hole and M hole, the max. hole machining length is 90mm.
(Note 2) For the frames with L-shaped cross section, D, S, M hole machining is not available.
For 4-Side Slot Frames
(Ex.: NEFSF6-3030, NEFST6-3030)
(Ex.: NEFS6-3030, NEFS6-3060) For Smooth Sided Frames
(D holes, S holes, M holes) 1 • For 2-Side/3-Side Slot frames, the D, M holes can be
＊ machined vertically or horizontally. Holes are not machined
on flat surfaces.
E When using the Single Joints HSJD for 2-side slot or
(D holes, S holes, M holes) ＊ 3-side slot, this hole machining will be performed.
EM holes go through.
• Place each type of frame in the same manner as indicated below.
＊
2 ① On the vertical length.
② Flat side down.
③ One flat side down and another flat side right.
＊ ＊ ＊ • Any S hole cannot be machined toward the smooth surfaces.
3
For the square-shaped cross section • If the cross section is rectangle-shaped, place the frame
＊ ＊ in such a way that the longitudinal sides are vertically stood.
• The D, S, M holes can be drilled vertically or horizontally.
• If any type of hole machining is not performed in combination ＊ ＊ NEFS6-3030-500-LDH
with other types of hole machining, it is not necessary to * D holes must not be machined on the
surfaces marked with this asterisk.
distinguish between vertical drilling and horizontal drilling.
For the rectangle-shaped cross section
• The D, S, M holes can be drilled vertically or horizontally. Place the frame in such a way that the smooth surface
E Place the frame in such a way that the longitudinal sides are vertically stood. is on the bottom side. For the frame with
rectangle-shaped cross section, however, ensure that
the longitudinal sides are vertically stood.
MISUMI contact MISUMI WEB “Chat” Install MISUMI APP
MISUMI WEB
Tel: 038-959200 or 1382
Email: cs@misumi.co.th 1190

1BSU @&/ JOEC
1BSU @&/ JOEC