Page 1201 - MISUMI Thailand Economy Series

Format Series Price Ratio Shipping Search Drawing Product Material Table Techinfo Others BD M D GM Format Series Price Ratio Shipping Search Drawing Product Material Table Techinfo Others BD M D GM
Title
KW
Pict
KW
Pict
Title
Date
Date
Name
Name
AK AK
M M
30 ALUMINUM FRAME
Series Slot Width 8: Series 30 for medium
coverings, conveyor frames...
When ordering, select Part Number and Values from Selection Steps 1~3.
Aluminum Frames 12Part Number - - 1000 Frames Aluminum
3L
NEFS6-606030

P.1183 L type 5-R2 30 15 HNTLSN P.1183
Brackets / Corners / Sheet Metals / Connectors 3-φ6.8 12 12 30 60 HTDN Sheet Metals / Connectors Brackets / Corners /

P.1215 30 1.9 7 2 8 16.5 15 P.1215
Nuts / Bolts Material Length Weight Section Area Cross Sectional Moment of Inertia Nuts / Bolts
NEFS6-606030
30
15
15
Clear Anodize
60
4
4
4
P.1243 A6063S-T5 50~4000mm 2.21kg/m 819mm 2 ℓ x 27.38×10 mm ℓ y 27.38×10 mm 4 P.1243
Decorative Accessories Aluminum Extrusion Frame Assembly (1) Begin assembling with the Bottom Frame. Connect the corners with Single Joints. Accessories Decorative
Assembly of Single Joint Connected Type
Bottom Frame Assy.
Mount the posts.
Prior to Beginning
(3) Insert the nuts prior to assembly.
P.1258 1. Provide a large and flat work space for the (2) Center joist is connected with Pre Assy. Ins. Center Joints. P.1258
assembly.
Tighten temporarily with the
Panel Fasteners / Panels / Door Sliding Slot Accessories 3. Count and confirm the quantity of the nuts to be (Refer to P.1883) Door Sliding Slot Accessories Panel Fasteners / Panels /
2. Sort the frames into parts and sizes.
pre-assembly insertion center joint.
pre-inserted.
Insert 2 pre-assembly fitting
nuts at the top of the frame.
at this point if mounting a top plate and/
P.1262 * Insert any Pre-Assembly. Nuts needed P.1262
or covers.
17 This assembly example also shows Insert 4 pre-assembly Single Joint Wrench Hole 17
nuts in the bottom of the frame
installation of Plate Type Adjusters and
to attach the plate with casters.
Casters.
Aluminum Frames / Related Accessories Connect the middle extrusions with Pre Assy. Ins. Center Joints. Pass the single joint through and position it. (Backlash should be kept.) Pass the single joint Related Accessories Aluminum Frames /
Assembly Method
* Do not forget to insert the nuts.
through and position it.
Top Frame Assy. (2)
Top Frame Assy. (1)
Mount the middle posts.
Pre-install Single Joints on the ends of four posts.
2 Pre-assembly fitting
Insert the pre-assembly fitting nuts here.
nuts for Pre-Assembly
Insertion Center Joints
Pre-Assembly Insertion
Center Joints Insert the pre-assembly
fitting nuts here. Slide and insert.
Adjuster and Caster Mounting Final Tightening Surface Cleaning
Attach the frame end caps.

Invert the unit and mount the adjusters and
casters. (Adjusters and Casters are sold separately on)
Fully tighten while adjusting the extrusion positions.
Wipe clean the surfaces with alcohol, etc. after the assembly work.
MISUMI contact MISUMI WEB “Chat” Install MISUMI APP
MISUMI WEB
Tel: 038-959200 or 1382
Email: cs@misumi.co.th 1196

1BSU @&/ JOEC
1BSU @&/ JOEC