Page 1286 - MISUMI Thailand Economy Series

Format Series Price Ratio Shipping Search Drawing Product Material Table Techinfo Others BD M D GM Format Series Price Ratio Shipping Search Drawing Product Material Table Techinfo Others BD M D GM
KW
Pict
KW
Title
Title
Pict
Name
Date
Date
Name
AK AK
M M
Economy series Aluminum Extrusions Frame Assembly Aluminum Extrusions Load Capacity Guideline Economy series
Aluminum Frames Aluminum Frames

Prior to Beginning 1 Assembly of Single Joint Connected Type. 2 Mount the posts.
Aluminum Frames 1. Provide a large and flat work space for the (1) Begin assembling with the bottom extrusion. Connect the corners with Single Joints.
Bottom Frame Assy.
(2) Center joist is connected with Pre Assy. Ins. Double
assembly.
Joints.
(3) Insert the nuts prior to assembly.
3. Count and confirm the qty. of the nuts to be
P.1183 2. Sort the extrusions into parts and sizes. 1Tighten temporarily with the
pre-assembly insertion double joint.
pre-inserted.
Tighten temporarily with the
pre-assembly insertion double joint.
Brackets / Corners / Sheet Metals / Connectors mounting a top plate and/or covers. 2 3Insert 2 pre-assembly fitting
* Insert any Pre Assy. Nuts needed at this point if
nuts at the top of the extrusion.
This assy. example also shows installation of
Plate Type Adjusters and Casters.
P.1215 3 2
2Insert 4 pre-assembly 2
Nuts / Bolts attach Casters with Mounting Plates. Single Joint Wrench Hole
nuts in the bottom of the frame to
Assembly Method
P.1243 * Do not forget to insert the nuts. Pass the single joint
Decorative Accessories 3 Mount the middle posts. 4 Top Frame Assy. (1) 5 Top Frame Assy. (2)
through and position it.
P.1258 Connect the middle extrusions with Pre Assy. Ins. Pre-install Single Joints on the ends of four posts.
Double Joints.
Panel Fasteners / Panels / Door Sliding Slot Accessories Pass the single joint through and position it.

( Backlash should be kept. )
for pre-assembly double joints.
Nuts for a Pre-Assembly
P.1262 Insert pre-assembly insertion nuts Two Pre-Assembly Insertion
Insertion Double Joint
17
Aluminum Frames / Related Accessories Pre-Assembly Insertion Insert the pre-assembly Slide and insert.

Double Joints
insertion nuts.

6 Adjuster and Caster Mounting 7 Final Tightening 8 Surface Cleaning
Attach extrusion end caps.

Invert the unit and mount the adjusters and casters. Fully tighten while adjusting the extrusion positions. Wipe clean the surfaces with alcohol, etc. after the assy. work.
(Adjusters and Casters are sold separately.)

1281

1BSU @&/ JOEC

1BSU @&/ JOEC