Page 14 - MISUMI Thailand Economy Series

Format Series Price Ratio Shipping Search Drawing Product Material Table Techinfo Others BD M D GM Format Series Price Ratio Shipping Search Drawing Product Material Table Techinfo Others BD M D GM
KW
Title
KW
Pict
Pict
Title
Date
Name
Name
Date
AK AK
M M
Development "Power" of MISUMI

Economy series Cam Followers Economy series Closed Belts ・Open End Belts

"Grooving" embedded sintering The tensile strength of timing
process resin coated cam follower belt is effectively enhanced,
type. High toughness and hardness, thanks to the control of raw
excellent wear resistance, good material quality and the
mechanical damping capacity, improvement of production
and good sliding performance. process.

Customer troubles on site and product development focus Customer troubles on site and product development focus

Is it possible to make improvements from
The roller and polyurethane coated part Nylon press-fit machining We always encounter the problem that polyurethane and core wire to solve the
of the cam follower are very easy to fall Poor adhesion between roller and nylon polyurethane timing belt core wire is customer's problems?
off, which has always been a problem. Will an alternative machining method improve this? weak in strength and breaks easily.
During each drawing-based machining The steel wire core is exposed, easy to
process, drawing and quotation are wind up on the pulley and cause injury
time-consuming and labor-consuming. to the installer. Is there any better
Designer Is there any good solution? Designer product?
Product Product
development development
MISUMI product development flow MISUMI product development flow

Creation Manufacture Sales Creation Manufacture Sales

Select the best method Reproducibility evaluation of Selection of the best method Reproducibility evaluation of
from multiple product trials customer use environment Pursuit of low price from multiple product trials customer use environment Pursuit of low price
Change the traditional machining method The test standard is based on the limits of the By procuring and localizing the The polyurethane formulation, the method The limit tension test of timing belt is By procuring and localizing the
(press-fit process). The original "Grooving" customer's operating conditions. Our in-house production of nylon raw materials in of kneading the steel wire core, and the conducted using special tension production of polyurethane raw
embedded sintering process solves the designed and manufactured walking test experimental China, the price has been reduced way of arrangement are changed. It has testing equipment. The data from materials and core wires in China,
problem of resin outer ring falling off easily machine has been awarded the national patent. The by 50% compared to MISUMI effectively solved the problems of weak more than 300 test results are used the price has been reduced by
under heavy load, partial load and data from more than 200 test results are standard products. core strength and exposed core caused to set the standards for the products 80% compared to MISUMI
high speed. Awarded used to set the standards for the products Awarded by timing belt cutting. to achieve the consistent quality standard products.
MISUMI to achieve the consistent quality required MISUMI required by MISUMI.
original by MISUMI. original Arrangement of
machining testing steel wire cores
patent patent
Urethane molded pull-out test data
Product Machining Pull-out test
difference Method result (Unit: N)
MISUMI 652 fall-off
standard product Press Fit Type occurrence
MISUMI Embedded 4340 fall-off
economy series Sintering occurrence Timing Steel
※Patent No.: ZL202021742764.5 ※Patent No.: ZL202022038407.7 belt body wire cores
Range of Products Range of Products

2 major Very satisfied that MISUMI has There is no need to worry about 3 major
categories of solved the problem of fall-off of the reoccurring problem of timing categories of
belt breakage and the core wires
products the roller and resin coating, and are arranged in a way that avoids products
24 common touched by the quality and price the injury to the installer. Thank 58 common
models in total Economy series Economy series of the product!!! Designer Designer MISUMI for launching such a Economy Economy Economy models in total
Nylon Coated Urethane Coated cost-effective product!!! series Open series Closed series Closed Belt
9 Cam Followers Cam Followers End Belt Belt (Standard) (Both Sides Cloth Lined)