Page 534 - MISUMI Thailand Economy Series

Format Series Price Ratio Shipping Search Drawing Product Material Table Techinfo Others BD M D GM Format Series Price Ratio Shipping Search Drawing Product Material Table Techinfo Others BD M D GM
KW
Pict
Pict
Title
Title
KW
Date
Name
Date
Name
AK AK
M M
Economy series Product Overview Product Overview Economy series
Timing Pulley Timing Pulley
Timing Pulley
P.529 vs Standard Type QTooth Profile Measurement of MISUMI Timing Pulleys
Economy series Saving · MISUMI timing pulley tooth profiles conform to JIS and ISO standards
up to
Example: The following are the test results of S5M tooth profile. The products of MISUMI specification conform to JIS / ISO standards,
Idlers and there is a difference in their engagement with timing belt between the generic products on the market and the standard sizes.
*
P.551 Timing Pulleys 68 % Generic products on the market Tooth profile does not conform to JIS / ISO standards. MISUMI Economy series tooth profiles conform to JIS / ISO standards.
The measured value of the tooth bottom circle is too large, which
The measured value of the tooth top circle and tooth bottom
is unqualified and has poor engagement with the timing belt.
circle is qualified, and has good engagement with the timing belt.
Timing Belts More suitable for reducing
the cost of reciprocating /
P.577 conveyance purposes R0.5605mm R0.2575mm
Closed End Belts Tooth profiles conform to JIS / ISO standards. rb Left rb Right R0.6111mm rb Left rb Right R0.2528mm

Improved assembly efficiency
Less belt wear
P.605
Open End Belts QTooth Profile Overview of MISUMI Economy series Timing Pulleys * Generic products on the market are similar products randomly purchased by our company from online or offline markets
* The test result are obtained through testing by our company, which are for reference only.
QLonger Timing Belt Life
Tooth Profile
P.611 Specifications MXL·XL T HTD S · MISUMI Economy series timing pulley, with chamfering and deburring treatment at the tapped hole,
Clamp Plates for Open End Belts Belt Wear Wear Test of Timing Pulley Belt condition after the test of timing belt pulley without
is not easy to wear the timing belt, and the price is cheap while increasing the lifetime of the timing belt.
chamfer on the tapped hole: there are obvious wear marks left
(Unit: mg)
P.615 Tooth Profile 200 Belt Wear by the pulley tooth tapped hole on the belt tooth surface.
QTest Conditions
5 Shape Reduced by
150 57% Belt Specification: S5M
Belt Width: 150mm
Timing Pulleys / Idlers / Timing Belts Transmission Standard Torque Standard Torque Transmission High Torque Transmission 100 190 80 drive side pulley: 20
Number of teeth of
Number of teeth of
driven side pulley: 60
Light Load Transmission
Rotational speed: 3000rpm
Transmission
Capacity
Positioning
Test time: 24H
Accuracy Low Height 50 Tension (N): 160N
Tapped Hole Tapped Hole
Not Chamfered Chamfered * Generic products on the market are similar products randomly
* Cases of poor quality of generic products on the market purchased by our company from online or offline markets
QExample of Customer Use * The test result are obtained through testing by our company, which are
QMore Convenient On-site Assembly for reference only.
· MISUMI Economy series timing pulley is chamfered at the shaft Generic products on the market * MISUMI Economy series
Workpiece Reversal hole and tapped hole for easy installation, reducing assembly Tapped Hole Not Chamfered Tapped Hole Chamfered
time by 27% compared to the timing pulley not chamfered.
Transfer Mechanism Assembly Time Assembly Test of Timing Pulley
(Unit: Second)
QPurpose 80 Overall
The workpiece moving on the conveyor belt rotates 90 MISUMI Economy series 70 67 Reduced
degrees and then transfers to the next process. Timing Pulley 60 27%
The chuck mechanism rotates 180 degrees and transfers 50 49
the workpiece without changing the direction of the 40 Generic products on the market * MISUMI Economy series
workpiece relative to the conveying direction. 62 Shaft Hole Not Chamfered Shaft Hole Chamfered
30 Screw Assembly
QMain Parts 20 46
MISUMI Economy series Timing Pulleys and 10
Timing Belts MISUMI Economy series MISUMI economy series 5 3 Rotating Shaft Assembly
Timing Belt Idler 0 Generic products on the market MISUMI Economy series
* Generic products on the market are similar products randomly purchased by our
company from online or offline markets
* The test result are obtained through testing by our company, which are for
reference only.
529

2023/10/27 11:02:11
Part05_EN.indb 529 2023/10/27 11:02:11
Part05_EN.indb 529