Page 535 - MISUMI Thailand Economy Series

Format Series Price Ratio Shipping Search Drawing Product Material Table Techinfo Others BD M D GM Format Series Price Ratio Shipping Search Drawing Product Material Table Techinfo Others BD M D GM
KW
Title
Pict
Pict
KW
Title
Name
Date
Name
Date
AK AK
M M
Economy series Product Overview Product Overview Economy series
Timing Pulley Timing Pulley Pulley Timing
vs Standard Type QTooth Profile Measurement of MISUMI Timing Pulleys P.529
Economy series Saving · MISUMI timing pulley tooth profiles conform to JIS and ISO standards Idlers
up to
Example: The following are the test results of S5M tooth profile. The products of MISUMI specification conform to JIS / ISO standards,
and there is a difference in their engagement with timing belt between the generic products on the market and the standard sizes.
Timing Pulleys 68 % Generic products on the market Tooth profile does not conform to JIS / ISO standards. MISUMI Economy series tooth profiles conform to JIS / ISO standards.
*
The measured value of the tooth bottom circle is too large, which The measured value of the tooth top circle and tooth bottom P.551
More suitable for reducing is unqualified and has poor engagement with the timing belt. circle is qualified, and has good engagement with the timing belt.
the cost of reciprocating / Timing Belts
conveyance purposes R0.5605mm R0.2575mm P.577

Tooth profiles conform to JIS / ISO standards.
R0.2528mm Belts Closed End
R0.6111mm
Less belt wear Improved assembly efficiency rb Left rb Right rb Left rb Right
P.605
* Generic products on the market are similar products randomly purchased by our company from online or offline markets
* The test result are obtained through testing by our company, which are for reference only.
QTooth Profile Overview of MISUMI Economy series Timing Pulleys Belts Open End
QLonger Timing Belt Life
Tooth Profile · MISUMI Economy series timing pulley, with chamfering and deburring treatment at the tapped hole, P.611
Specifications MXL·XL T HTD S is not easy to wear the timing belt, and the price is cheap while increasing the lifetime of the timing belt.

Belt Wear Wear Test of Timing Pulley Belt condition after the test of timing belt pulley without Open End Belts Clamp Plates for
chamfer on the tapped hole: there are obvious wear marks left
(Unit: mg) by the pulley tooth tapped hole on the belt tooth surface.
200
Tooth Profile Belt Wear QTest Conditions P.615
Shape Reduced by 5
150 57% Belt Specification: S5M
Belt Width: 150mm
Number of teeth of
190 drive side pulley: 20
100 Number of teeth of
Transmission Standard Torque Light Load Transmission High Torque Transmission driven side pulley: 60 Idlers / Timing Belts Timing Pulleys /
Capacity Transmission Standard Torque Transmission 80 Rotational speed: 3000rpm
50 Tension (N): 160N
Positioning Low Height Test time: 24H
Accuracy
Tapped Hole Tapped Hole
Not Chamfered Chamfered * Generic products on the market are similar products randomly
* Cases of poor quality of generic products on the market purchased by our company from online or offline markets
QExample of Customer Use * The test result are obtained through testing by our company, which are
QMore Convenient On-site Assembly for reference only.
· MISUMI Economy series timing pulley is chamfered at the shaft Generic products on the market * MISUMI Economy series
Workpiece Reversal hole and tapped hole for easy installation, reducing assembly Tapped Hole Not Chamfered Tapped Hole Chamfered
time by 27% compared to the timing pulley not chamfered.
Transfer Mechanism Assembly Time Assembly Test of Timing Pulley
(Unit: Second)
QPurpose 80 Overall
The workpiece moving on the conveyor belt rotates 90 MISUMI Economy series 70 67 Reduced
degrees and then transfers to the next process. Timing Pulley 60 27%
The chuck mechanism rotates 180 degrees and transfers 50 49
the workpiece without changing the direction of the 40 Generic products on the market * MISUMI Economy series
workpiece relative to the conveying direction. 62 Shaft Hole Not Chamfered Shaft Hole Chamfered
30 Screw Assembly
QMain Parts 20 46
MISUMI Economy series Timing Pulleys and 10
Timing Belts MISUMI Economy series MISUMI economy series 5 3 Rotating Shaft Assembly
Timing Belt Idler 0 Generic products on the market MISUMI Economy series
* Generic products on the market are similar products randomly purchased by our
company from online or offline markets
* The test result are obtained through testing by our company, which are for
reference only.
530

Part05_EN.indb 530 2023/10/27 11:02:12
Part05_EN.indb 530
2023/10/27 11:02:12