Page 98 - MISUMI Thailand Economy Series

Format Series Price Ratio Shipping Search Drawing Product Material Table Title Techinfo Others BD M D GM Format Series Price Ratio Shipping Search Drawing Product Material Table Title Techinfo Others BD M D GM
KW
Date
Name
Pict
KW
Pict
Name
Date
AK AK
M M
1 Economy series Product Overview Product Overview Economy series 1
Lead Screws
Lead Screws
Ball Screws / Lead Screws / Actuators vs Standard Type QFeatures of Each Part of the Lead Screw and Related Products Lead Screws / Actuators Ball Screws /

Saving
up to
Feature: Finish the shaft end machining according to the dimensions of the support unit
Rolled Ball Screws Economy series 84 % · Lead Screws P. 98~P. 110 Screws Rolled Ball
Lead Screw and
Customer only needs to select D, L or S.

There are keyway, threaded hole processing and other items in the alteration, so tools such as handles can be installed.

P.37 Related Products Economy series Lead Screw and Retaining ring groove machining Male thread machining P.37
(support side)
Precision Ball Screws Semi-finished screws in stock Support Unit 3.2 R0.3 B R0.3 R0.3 0 E-0.05 6.3 0 E-0.1 Screws Precision Ball
(fixed side)
M
m
3.2
P.59 Easy design, greatly reducing Rh7 e 3.2 D 3.2 A 15 6.3 Qh7 P.59
design time
Support Units for Ball Screw 3.2 F L T S 6.3 for Ball Screw Support Units

P.81 · Nuts P.111~P.114 2-C0.5 R0.4 C0.5 P.81

Motor Brackets QAllowing to significantly reduce the design time of the lead screw rotating unit Product series: Standard flanged type, Compact K 1.6 Brackets Motor
flanged type, Nut Wide Block, etc.
Economy series standardized parts · Standardize support unit Feature: The shapes are fully equipped to D1 d Dh8
P.91 Stop Plates Standardize the special "support unit" for lead screw. correspond to different use cases. P.C.D. P.C.D. 1.6 P.91
Lead Screws
There is no need to design the bearing mechanism.
All models in stock, allowing same-day
Lead Screws · Standardize the shape of lead screw shaft end shipment at the earliest D T L1 Lead Screws
If the shaft diameter and length are determined, they
can be combined directly with the support unit.
P.93 Fixed Side Support Side There is no need for complicated shaft end shape · Lead Screw Support Units and Stop Plates P.115~P.127 P.93
design.
Support Unit
Lead Screw Nuts Support Unit · No need for combination design of various parts Feature: The support unit with preloaded radial bearings is suitable for the lead screw rotating units. Nuts Lead Screw
If the specifications of each part are met, it can be
The fixed side and support side of the support unit can be purchased as a set. The price is more favorable than when purchased as a single piece.
The lead screw rotating unit
assembled directly.
can be completed only by
Product series: Square Type, Round Type
various parts.
P.111 Position Indicators selecting standard parts. There is no need for complicated combination design of Support Unit Fixed Side Square Type Support Unit Support Side Square Type Stop Plates For Support Unit Square Type P.111
Lead Screws Support Units QReference thread tooth shape of Lead Screws (30 Degree Trapezoidal) Support Units Lead Screws
P.115 P.115
Stop Plates / Position Indicators H/2 H1/2 Female Thread H=1.866P H1=0.5P d2=d-0.5P d1=d-P D=d D2=d2 D1=d1 Position Indicators Stop Plates /
Male Thread
15° 15°
P.119 H H/2 H1 Male Thread d1 or D1 d2 or D2 d or D d: O.D. d1: Thread bottom dia. d2: Effective dia. · Position Indicators P.128~P.130 P.119
30°
Female Thread
Product series: available with 3 mounting types and 2 sleeve materials, featuring economy series yellow
Actuators P D: Thread bottom dia. D1: I.D. D2: Effective dia. P: Pitch H1: Height of screwing part housing and pitch coverage for economy series lead screws. Actuators
Feature: digital rolling display, easy to read, allowing for convenient positioning and indexing through feed screw.
P.131 QLead screw specification accuracy Standard Type Front Type Vertical Type P.131
Mounting Reading Display
QRunout Measurement Method Position Suitable for use when the indicator needs to Suitable for use when the indicator needs to Suitable for use when the indicator needs to be
Item Content be installed below the operator’s line of sight. be installed near the operator’s line of sight. installed on a vertically-mounted screw mechanism.
Screw accuracy Class 7e
Nut accuracy Class 7H Normal Type 1/10 digit
D 1/100 digit
Single pitch error ±0.02 Stainless (Scale)
Steel Type
Accumulated pitch error ±0.15/300mm
Total length runout tolerance See P. 96 Table (20) (20)
93

1BSU @&/ JOEC

1BSU @&/ JOEC