Page 424 - MiSUMi 2025

Economy series Product Overview Product Overview Economy series
Cross Roller Guides Cross Roller Guides

Economy series

Cross Roller Guides

High rigidity

Smooth movement

Rich in specifications

4 QPrecision MISUMI Economy MISUMI Standard 4
Unit: mm
Linear Guides / Linear Shafts / Linear Bushing / Ball Splines / Oil Free Bushings Allowable Dimension series products H Oil Free Bushings Linear Bushing / Ball Splines / Linear Guides / Linear Shafts /
Precision grade

Tolerance
±0.02
±0.01
of Height H
Linear Guides Difference in 0.01 0.005 Guides Linear
Height H*
P.04-011 Allowable Dimension P.04-011
Cross Roller Guides Tolerance of -0.2 -0.1 W Guides Cross Roller
0
0
Width W

P.04-039 Applications Medium precision, low High precision, high P.04-039
Linear Shafts / Bushings *The Difference in Height H applies to 4 rails used on the same plane. Bushings Linear Shafts /
and medium
frequency drive
frequency drive

P.04-043 QLubrication P.04-043
Ball Splines To prevent rusting, Cross Roller Guides are coated with rust preventive oil before leaving the factory. Customers shall wipe off the rust Ball Splines
preventive oil and apply grease properly before installation and use.

P.04-107 QDust prevention P.04-107
The Cross Roller Guide is a type of precision part, and its service life will be shortened or its precision reduced if any dust, debris or other
Oil Free Bushings foreign matter enters the inside of the roller, so it is recommended to take proper dust prevention measures. Bushings Oil Free

P.04-126 QPreload adjustment P.04-126
When installing a Cross Roller Guide, it is necessary to ensure the magnitude of the preload by adjusting the track clearance to achieve the
Shaft Supports / Collars Collars Shaft Supports /
required accuracy and smoothness. For details of the operation method, please refer to [QInstallation Procedure of Cross Roller Guide].

P.04-144 P.04-144
04-039 04-040