Page 46 - MiSUMi 2025

1 Economy series Selection Method Precaution Linear Motor Actuators
Economy series
Linear Motor Actuators
Linear Motor Actuators / Electric Cylinders / Actuators OPTION Change the Number of Sliders

Linear Motor Actuators MISUMI Linear Motor Actuators has a single slider and the number of sliders can be changed according to customers' requirements.
<Example of use with multi-slider>
<Advantages of multi-slider>
electric cylinder and gripper to perform gripping actions.
P.01-005 The 4 Sliders can be controlled individually and cooperate with the
LM Actuator with 4 Sliders
Electric Cylinders

P.01-045 ● Simple structure and low cost
● Can be controlled individually on the same module
Single Axis Actuators

P.01-073 <Can be changed up to 4 Sliders>
Single Axis Robots Guide Built-in Type Standard Slider Standard Slider Standard Sliders added (Total 4pcs)
Sliders added (Total 2pcs)
Sliders added (Total 3pcs)
Slider
P.01-089 Alterations Stroke Y Stroke Y Stroke Y
L
L
L
Single Axis Robots Screw Drive After Slider Slider L After Slider Slider Slider L After Slider Slider Slider Slider
Change
Change
Change
L
Code
B2
B3
B4
P.01-117 E After specifying the number of sliders, the number of photomicro sensors on the actuator base changes from 3 to 4, and the additional sliders will
Single Axis Robots Belt Drive Example: It shows below the change in sensors when the change in number of sliders (2) is specified. Photomicro Photomicro
be equipped with an anti-collision photo micro sensor.
Sensor flag
Photomicro
anti-collision
right origin
P.01-181 Photomicro positive limit Photomicro left origin negative limit
Slider Slider
Actuator base
Model Generation Option Sample

<Application Requirements>
● Positioning repeatability: ±5μm ● Speed: 0.9m/s ● Control mode: Pulse
● Installation direction: Horizontal installation ● Acceleration/Deceleration: 0.5G ● Length from control cabinet to actuator: 2 meters
● Weight: 4kg ● Stroke: 160mm ● Number of sliders: 1
<Model Selection Results>
Type Stroke Driver Extension cable Change the number
length
(required) (required) (required) (required) of sliders
(optional)
E-RAM6-S 160 MA30 C3

Attached with
photomicro sensors (3)
Output mode: NPN
Cable length: 2m
<Linear Motor Actuator> <Driver> <Extension Cable>
01-009 01-010