Page 75 - MiSUMi 2025

1
Economy series Product Overview Product Overview Economy series
Linear Motor Actuators Full Cover Type Linear Motor Actuators Full Cover Type

Preventing Intrusion of External Objects Electric Cylinders / Actuators Linear Motor Actuators /
Linear Motor Actuators Products
New
Full Cover Type The gap between the slider and stator is small Actuators Linear Motor

P.01-005
High speed
Minimum maintenance required Cylinders Electric

Block off external objects and small items Block external objects from
falling in and damaging P.01-045
the motor Actuators Single Axis

P.01-073

Types of External Objects Guide Built-in Type Single Axis Robots
Single Axis Robot Linear Motor Actuator
Fully Sealed Full Cover Screws, nuts Small electronic components P.01-089
Type
VS Screw Drive Single Axis Robots

P.01-117

Belt Drive
Structural Differences The steel shim The slider and cover plate are Experimental Results Against External Objects P.01-181
Single Axis Robots
directly contacts
the slider
contact free

Performance Differences Moving speed Acceleration Moving speed Acceleration Step 1 Step 2

max 2m/s
1.5G
max 0.5m/s
0.3G

Frictionless and *The above equipment is a display unit for MISUMI products Small resin round head screws To check the internal status
Using an industrial camera
Test props
Maintenance Specification: M3×10
maintenance-free
with cross holes
After testing,
2
Facing the problem of warping and curling of Step 1 The screws are falling from the top down the result of blocking
the steel shim due to friction from direct contact Step Install an industrial camera on the cover small objects is positive.
01-037 end to inspect the internal condition 01-038