Page 74 - MiSUMi 2025

1 Economy series Product Overview Product Overview Linear Motor Actuators Full Cover Type
Economy series
Linear Motor Actuators Full Cover Type
Linear Motor Actuators / Electric Cylinders / Actuators Preventing Intrusion of External Objects

New
Linear Motor Actuators Linear Motor Actuators Products The gap between the slider and stator is small
Full Cover Type

P.01-005
High speed
Electric Cylinders Minimum maintenance required

P.01-045 Block off external objects and small items Block external objects from
falling in and damaging
Single Axis Actuators the motor

P.01-073
Single Axis Robots Guide Built-in Type Linear Motor Actuator Types of External Objects

Fully Sealed
P.01-089 Single Axis Robot Full Cover Screws, nuts Small electronic components
Single Axis Robots Screw Drive Type VS

P.01-117
Single Axis Robots Belt Drive

Structural Differences the slider The slider and cover plate are Experimental Results Against External Objects
P.01-181 The steel shim
directly contacts
contact free

Performance Differences Moving speed Acceleration Moving speed Acceleration Step 1 Step 2

max 2m/s
1.5G
max 0.5m/s
0.3G

Test props
Using an industrial camera
Frictionless and *The above equipment is a display unit for MISUMI products Small resin round head screws To check the internal status
Maintenance Specification: M3×10
maintenance-free
with cross holes
After testing,
Facing the problem of warping and curling of Step 1 The screws are falling from the top down the result of blocking
2
the steel shim due to friction from direct contact Step Install an industrial camera on the cover small objects is positive.
01-037 end to inspect the internal condition 01-038