Page 964 - MiSUMi 2025

Economy series Product Overview Product Overview Economy series
Flat Belts
Flat Belts
Conveyors

QSave time by providing the technical parameters needed to design a conveyor line
P.11-007 · All parameters required for conveyor line design are based on actual measurements from MISUMI.
Flat Belt Pulleys / Flat Belts Economy series Application Surface Material Number of Layers Minimum Pulley Allowable (Reference value for ground steel)

Friction Coefficient
Flat Belts
Tension
Diameter
P.11-071 4 most common types for Urethane 1 φmm N/mm Surface Back side
0.4
4
10
0.1
Urethane Molded Rollers / Urethane Molded Bearings / Guide Rollers conveyor lines are available. For General Use Polyvinyl Chloride 2 1 2 30 6 4 6 0.4 0.1
Urethane
0.2
10
0.5
0.2
Polyvinyl Chloride
30
0.5
For Electronic Parts
P.11-085 For General Use For Electronic Parts *Surface Resistance Value: 10 ~10 Ω Urethane 1 2 15 4 6 0.4 0.1
Urethane
0.1
0.4
30
6
8
Ball Rollers / Cam Followers For Sliding For Sliding Urethane Impregnated 1 2 10 4 6 0.2 0.1
Urethane Impregnated
0.2
0.1
20
For Transferring
Urethane
For Transferring Bulk Materials
20
1
P.11-097 Bulk Materials EFor relevant technical parameters of Flat Belts, please refer to MISUMI official website. 4 0.4 0.2
* The surface resistance value is the value measured only with the belt under the following test conditions. It changes due to the influence of the environment and
Silicon Bearings / Bearings with Screw / Roller Carriers QUsage difference between MISUMI Economy series and MISUMI Standard products QPrevents "workpiece displacement" that is common when transporting lightweight workpieces
peripheral devices. This is a reference value, not guaranteed value.
Test Conditions: Temperature 23±2°C, Humidity 50±5%.
P.11-119 · The difference between MISUMI Economy series and MISUMI Standard products is noise performance. · MISUMI Economy series Flat Belt uses a durable fabric on the back side to effectively prevent warping on
both sides of the belt and prevent displacement during transportation of lightweight workpieces
Placon Rollers / Free Rollers / Sprocket Rollers MISUMI Standard products MISUMI Economy series Generic products on the market* MISUMI Economy series
· The noise performance is affected by the ambient sound of the surrounding equipment, and the impact is small in actual use.
P.11-125
11 Example of Use
Conveyors / Flat Belts / Rollers / Cam Followers Noise performance* High-speed transfer General purpose Normal (61dB)
transfer
where noise control is required
Excellent (56dB)
* The difference in fricative noise of the iron plate that supports the conveyor belt etc. is about 5 dB. The reference value of friction noise is the result of the actual
installation test of MISUMI conveyor, for reference only.
QExample of Customer Use * Generic products on the market are similar products randomly purchased by MISUMI from the market.
QQuality Assurance of Joint for Smooth Transfer
Electronic parts pallet conveyor line QCustomer Voice · The joint seam of MISUMI Economy series Flat Belt is flat, which can avoid the transfer failure caused by
belt runout and uneven joint seam.
Generally speaking, 10 to 10 Ω
8
6
can meet the transmission Generic products on the market* MISUMI Economy series
MISUMI Economy series Flat Belts requirements of common
For Electronic Parts electronic parts. It would be better Uneven joint seam Flat joint seam
if the parameters required for the Body Thickness : 1.0mm Body Thickness : 0.90mm
: 0.93mm
Joint Thickness
Joint Thickness
: 1.5mm
MISUMI Economy series design could be provided at an Segment Difference at Joint Seam : 0.5mm Segment Difference at Joint Seam : 0.03mm
Flat Belt Pulleys affordable price.
Electronic Parts Shanghai XXX
Technology
Co., Ltd.
Mr. Hao
Customer
* Generic products on the market are similar products randomly purchased by MISUMI from the market.
* The above values are obtained through random sampling by MISUMI for reference only.
11-081 11-082