Page 994 - MiSUMi 2025

Economy series Product Overview Product Overview Economy series
Cam Followers
Cam Followers
Conveyors

P.11-007
Flat Belt Pulleys / Flat Belts Economy series New Coated Type Economy series - Cam Followers
Specs
Miniature Stainless Steel
Nylon
P.11-071 Cam Followers Standard Steel Type
Urethane Molded Rollers / Urethane Molded Bearings / Guide Rollers Resin outer ring, no longer · Miniature specification: The New
easy to fall off
Specs
P.11-085 *Newly added body stainless steel series hardness of the shaft rod
improved, not easy for the
Ball Rollers / Cam Followers Coated Type · Launched new stainless steel
shaft rod to break
Urethane

P.11-097 products
Silicon Bearings / Bearings with Screw / Roller Carriers QProduct Series Description QProduct Specifications

P.11-119 Nylon Coated Type Urethane Coated Type · The Cam Follower is a bearing with needle shaped rollers installed in the thick walled outer ring and rod end,
which features small friction coefficient and excellent rotation, and is suitable for use under high load conditions.
Placon Rollers / Free Rollers / Sprocket Rollers · The designed radial clearance of the Cam Follower is smaller than that of the general needle roller bearing,
which can effectively reduce the impact load and obtain a stable long life, and is most suitable for the shaft
bearing of the transmission guide rail.
P.11-125 Standard Small Miniature
11 Nylon Coated Cam Follower is the product which nylon sleeve is Urethane Coated Cam Follower is the product which urethane sleeve is
Conveyors / Flat Belts / Rollers / Cam Followers QProcess Improvement the resin part from falling off. It has excellent characteristics of low particle Appearance 22~90mm 12~19mm 4.5~10mm
press-fitted into the "grooved outer ring", then wrapping cured to
press-fitted into the "grooved outer ring", then wrapping cured to prevent
prevent the resin part from falling off. It has excellent strength,
noise generation, greater elasticity, vibration absorption, good buffer effect.
wear resistance, damping, and sliding performance.
MAX
Min
MAX
19mm
90mm
4.5mm
O.D.
Trouble on site Improved process and greatly Miniature Stainless Steel Standard
enhanced performance
QMISUMI original embedded "Grooving" Cam Follower machining technology
Improved machining process solved the problem of the outer ring falling off
under the conditions of high speed, heavy load, and eccentric load.
*Patent No.: ZL 2020 2 1742764.5 With excellent corrosion resistance, stainless Suitable for small fixtures with narrow Built-in cage and sealing ring, and
steel Cam Followers are suitable for liquid mounting space, and can be used for suitable for low and medium speed and
QWalking Testing Equipment splashing environment and dust-free clean rooms. positioning, conveying and other purposes high load-bearing applications
The performance is significantly improved compared with the existing
MISUMI equivalent products as a result of Multi-angle driving simulation. QProduct Features
*Test by MISUMI self-developed testing equipment
Test Method *Patented
The problem that the shaft rod of the miniature Cam Follower is easy to break Stainless steel material salt spray test result (48H)
Generic products on the market* MISUMI Economy series Generic products on the market* MISUMI Economy series
Please try to make Shaft rod is Shaft rod Rust area Rust area
Shaft rod
Ordinary Press-fitting Process the inclination of extremely easy strength is is not easy exceeds is within
to break.
to break.
95%.
3%.
the resin Cam
greatly
The outer ring tends to fall off when used Follower zero. improved
under conditions such as high speed,
inclination, and high loads. * Generic products on the market are similar products randomly purchased by MISUMI from the market. * Generic products on the market are similar products randomly purchased by MISUMI from the market.
* The test data are obtained through testing by MISUMI, which are for reference only
* The test data are obtained through testing by MISUMI, which are for reference only
11-111 11-112