Page 1086 - MiSUMi 2025

Economy series Product Overview Product Overview Economy series
Manual Positioning Stages Manual Positioning Stages

Locating Pins Economy series Pins Locating

P.12-009 Manual Positioning Stages P.12-009
Bushings For Locating Pins Locating Pins Bushings For

P.12-053 Cross Roller Guide Type (Aluminum Alloy) P.12-053
Linear Ball Guide Type (Tool Steel)
Adjusting Bolts / Adjusting Stopper Screws / Clamping Screws Strong holding force Clamping Screws Adjusting Stopper Screws / Adjusting Bolts /

P.12-061 Low price P.12-061
Polyurethane Pushers Pushers Polyurethane
Various alterations, up to 10 micrometer knob positions

P.12-069 P.12-069
Micrometer Heads Product Features Heads Micrometer

P.12-073 2.5 times higher holding force due to improvement of clamp mechanism P.12-073
Positioning Stages 3D figure of manual positioning stage Problems with generic products on the market * Stages Positioning

P.12-075 Clamping The lock screw has a relatively low holding force (typically 40N) P.12-075
after it is locked in place, which easily causes loosening.
mechanism
Other New Products Improvements to Economy series Manual Positioning Stages Products Other New

P.12-115 Improvement 1 P.12-115
12 ❶ The relief groove at the root of 12
the lock screw is removed so that
Locating Pins & Bushings / Position Adjustment Parts / Positioning Stages Section view of 1 Lock screw achieving a uniform stress. Adjustment Parts / Positioning Stages Locating Pins & Bushings / Position
the ❷ washer is centered,

Improvement 2

clamping mechanism
washer is decreased to reduce
Tabletop 2 Washer ❷ The inner diameter of the
the fit clearance between the
washer and ❶ the lock screw so
that a uniform stress is achieved.
Improvement 3

❷ The material of the washer is
changed from nylon to stainless
steel to increase the frictional
Base
resistance.
The test shows the improved Compared to generic products on
holding force has reached the market, it has increased by
100N 2.5 times

*Generic products on the market are similar products randomly purchased by MISUMI from the market.
12-075 *The amount of holding force varies with the tightening torque. For complete locking, please select the 12-076
The above data is limited to sample test results, which is for reference only.
opposed clamp mechanism.