Page 891 - MiSUMi 2025

Economy series Product Overview Product Overview Economy series
Conveyors Conveyors Conveyors

P.11-007
Economy series - Conveyors Timing Belt Conveyors, Single Track Timing Belt Conveyors, Dual Track, Flat Belts Flat Belt Pulleys /
Pulley Dia. 30mm

Local Production, Cost Reduction, Delivery Time Reduction
P.11-071
Lower Cost Shorter Delivery Time More Varieties
Conveyors with a width of 10mm, 20mm. Stoppers, sensors, etc. can be installed between the belts. Guide Rollers Urethane Molded Bearings / Urethane Molded Rollers /
Suitable for conveying small workpieces. Suitable for conveying products such as fixtures and pallets,
Welcome to Customize supporting precision positioning during transport.
Timing Belt Conveyors, Dual Track, Timing Belt Conveyors, Dual Track, P.11-085
Note: Scope of customization: While keeping the frame of Pulley Dia. 70mm Motor Built-in Type
the standard type unchanged, the motor and the belt
can be changed, the pulley center distance can be Cam Followers Ball Rollers /
increased, or legs, raised edges, material retaining
plates, and punching in the frame can be added. P.11-097
Timing belt width: 50mm, Motor output: 60W~120W. Stoppers, sensors, etc. can be installed between the belts.
Suitable for conveying heavy workpieces. With a built-in motor to reduce space occupation, suitable for
conveying products such as fixtures and pallets. with Screw / Roller Carriers Silicon Bearings / Bearings
QPrecautions for Use
1Please do not disassemble or modify the Conveyor by yourself, which may lead to poor performance. P.11-119
2Power supplies, cables, and switches are not included with MISUMI Conveyors because of the different operating conditions.
3 Considering the structural strength and body deformation of Conveyors, please do not select any out-of-limit allowable load, length, or width. Placon Rollers / Free Rollers /
4Single-phase 220V and three-phase 220V motors are available. Please select the voltage as required. Sprocket Rollers
5The oil-resistant specification applies only to the conveying surface. If oil comes into contact with the back side of the belt, it may become unusable.
6Belt meandering is a normal phenomenon and thus not considered as a quality problem, and meandering adjustment is a part of the daily maintenance. P.11-125
7 When running in the opposite direction of the standard running direction, anomalies such as belt meandering, belt damage, noise, and 11
jamming will occur. Therefore, please avoid using Conveyors this way.
QBelt Length
L: Pulley Center Distance; B: Belt Width Rollers / Cam Followers
Economy series Category Drive Pulley Dia. With / Without Meandering Calculation of Belt Unit Conveyors / Flat Belts /
Type Position Prevention Crosspieces Circumference Length
E-SVKA Standard Flat Belt Head Without (2L+96)/1.002/1000
E-SVKB Standard Flat Belt Head With (2L+96)/1.002/1000
E-SVKN Standard Flat Belt Center Without (2L+260)/1.002/1000
E-SVKR Standard Flat Belt Center With (2L+260)/1.002/1000
E-CVGA Standard Flat Belt Head 30 Without (2L+96)/1.002/1000
E-CVGB Standard Flat Belt Head With (2L+96)/1.002/1000
E-CVGN Standard Flat Belt Center Without (2L+260)/1.002/1000
E-CVGP Standard Flat Belt Center With (2L+260)/1.002/1000
E-CVSJA Standard Flat Belt Center With (2L+262)/1.002/1000
E-CVGC Standard Flat Belt Head Without (2L+160)/1.002/1000
E-CVGD Standard Flat Belt Head 50 With (2L+160)/1.002/1000
E-CVGR Standard Flat Belt Center Without (2L+325)/1.002/1000
E-CVGW Standard Flat Belt Center With (2L+325)/1.002/1000 m
E-CVSE Standard Flat Belt Head 60 With (2L+188)/1.003/1000
E-CVSG Standard Flat Belt Head 80 With (2L+252)/1.003/1000
E-CVSFA Full Flat Belt Head Without (2L+96)/1.002/1000
E-CVSFC Full Flat Belt Head 30 With (2L+96)/1.002/1000
E-GVFN Full Flat Belt Center Without (2L+275)/1.002/1000
E-GVFP Full Flat Belt Center With (2L+275)/1.002/1000
E-CVSFB Full Flat Belt Head 50 Without (2L+160)/1.002/1000
E-CVSFD Full Flat Belt Head With (2L+160)/1.002/1000
E-CVDSA Special Flat Belt Head With (2L+160)/1.002/1000
E-CVBTA Special Flat Belt Head 50 Without (2L+160)/1.002/1000
E-CVBTN Special Flat Belt Center Without (2L+325)/1.002/1000
E-CVSMA Special Flat Belt Center 70 Without (2L+220)/1.002/1000
E-CVSTC Single Track Timing Belt Head 20 / B10:(2L+130)/5 B20:(2L+165)/5
E-CVSTR Single Track Timing Belt Center / B10:(2L+200)/5 B20:(2L+235)/5
E-CVGTA Dual Track Timing Belt Head / (2L+100)/5
E-CVGTN Dual Track Timing Belt Center 30 / (2L+260)/5
E-CVGTB Dual Track Timing Belt Head / (2L+180)/10 Teeth
E-CVGTP Dual Track Timing Belt Center 50 / (2L+420)/10
E-CVGTD Dual Track Timing Belt Head / (2L+180)/10
E-CVGTC Dual Track Timing Belt Head 70 / (2L+230)/10
11-007 E-CVGTE Dual Track Timing Belt Head / (2L+230)/10 11-008