Page 1115 - MiSUMi 2025

Economy series Product Overview Product Overview Economy series
Motorized Rotary Stages Motorized Rotary Stages

Locating Pins I Installation posture of positioning stage Pins Locating
The performance of each product is based on the condition of being set up on a level surface.
Be careful when using a product that is mounted upside down, to the side (vertically or horizontally), or in any posture other than on a level surface.
P.12-009 The load capacity and accuracy may vary greatly with the installation posture. P.12-009
For Product Features by Posture information, please refer to below table:
Bushings For Locating Pins ▼Table of Product Features by Posture Locating Pins Bushings For
We will introduce the optimum mechanism products and usage methods to meet your operating conditions.

Movable guide [feeding method]
Part Number
P.12-053 G Usable despite the restrictions on load and torque. Upside-down use Side (horizontal) use Side (vertical) use P.12-053
Angular contact ball bearing (ball screw type)
E-RMBG
G
G
G
Adjusting Bolts / Adjusting Stopper Screws / Clamping Screws Clamping Screws Adjusting Stopper Screws / Adjusting Bolts /
P.12-061 QAbout Rotation Center Center of Rotation P.12-061
I About how to align rotational center axes
Polyurethane Pushers When assembling a rotary positioning stage with matching devices Pushers Polyurethane
and workpieces, align the center axes as far as possible so that the
performance of the stage can be maximized.
use.
P.12-069 It is recommended that the center axes be aligned as follows before P.12-069
· While rotating the rotary positioning stage, use a micrometer
Micrometer Heads · When used in combination with an XY-axis manual positioning Heads Micrometer
to index the position with the minimum eccentricity to fix the
positioning stage or workpiece.
stage, fine adjustment of center axis can be done easily.
P.12-073 E The body of the positioning stage does not have a reference P.12-073
plane for mounting.
Positioning Stages Stages Positioning

P.12-075 Usage difference between Economy series and Standard products P.12-075
Other New Products MISUMI Standard products MISUMI Economy series Products Other New

Suitable for applications
Suitable for applications not
P.12-115 requiring high precision such requiring high precision such P.12-115
as simple adjustment
as precise adjustment
12 12
Locating Pins & Bushings / Position Adjustment Parts / Positioning Stages Adjustment Parts / Positioning Stages Locating Pins & Bushings / Position

Equipment Name: Workpiece PCD Hole Angle Measurement Equipment Equipment Name: Substrate UV Waterproof Adhesive Coating Equipment

12-103 12-104