Page 327 - MiSUMi 2025

Ordering Part Number (1Type · 2Screw Shaft O.D. · 3Lead) - 4L - (FC·SC…etc.)
Alterations Example C-KBS0802 - 200 - SC5
QSupport side QFixed side
1 Alterations Code Spec. 5 Alterations Code Spec.
1 No Machining on Support 5 Wrench Flats on Fixed Adds wrench flats on the fixed
Side Shaft End Side side shaft end.
Ordering Code SZC
Standard No machining added on the E Ball bearings will fall out if the
When NC support side shaft end. 4 4 SZC ball nut crosses the wrench flats.
0
machining is Ordering Code NC 5-0.2 28 E The nut may not be moved within
specified
L the Incomplete Hardened Area.
Incomplete Hardened Area Note that when selecting.
2 Ball Nut Orientation 6 Flat Machined on Fixed Adds a flat on the fixed side
Reversed Side Shaft End
shaft end.
(Support side)
3 Standard (Fixed side) RLC Changes the nut direction. SC 5≤SC≤7 3
When specified simultaneously
Ordering Code RLC
SC 0.5 with 8, 5≤SC≤F-1
Change SC=1mm increments
Ordering Code SC6
Ball Screws / Lead Screws 3 No Retaining Ring RNC No Retaining Ring Groove on 7 Standard NF No machining of small steps on Lead Screws Ball Screws /
No machining of small
Groove on Support Side
steps on the fixed side
Shaft End
Support Side Shaft End.
the fixed side
Standard
When
machining is Ordering Code RNC Change Ordering Code NF
specified 8 Change dimensions of
L
Change the length of
Rolled Ball Screws the support side shaft FC Change the length of the Recommended P FP Change dimensions of small Screws Rolled Ball
4
small steps on the fixed
side
end
support side shaft end.
steps on the fixed side
9≤FC≤20
8≤F≤13 4≤P≤5
FC=1mm increments
F, P=1mm increments
6.8
F
P.03-009 FC Ordering Code FC20 9 Change dimensions of big Ordering Code FP-F13-P5 P.03-009
Precision Ball Screws Recommended U EU Change dimensions of big steps Screws Precision Ball
steps on the fixed side
on the fixed side
9≤E≤30 6≤U≤E-3
E, U=1mm increments
E
P.03-027 0 No machining of big Ordering Code EU-E30-U10 P.03-027
Ball Screw Supports / Motor Brackets Standard NU No machining of big steps male Motor Brackets Ball Screw Supports /
steps male thread on the
fixed side
thread on the fixed side
Ordering Code NU
Change
P.03-047 E Only one of 1, 3 and 4 can be selected. P.03-047
Lead Screws E When 9 and 0 are specified simultaneously, no male thread will be machined Lead Screws
E Only one of 7 and 8 can be selected.
regardless of the value specified for U in 9.
E When 9 or 0 is specified, the recommended support unit may not be available.
Please reconfirm.
P.03-058 E When specifying any alteration, the nut motion range (Y dimension) may P.03-058
become shorter. Please make sure that the nut motion range is greater than the
full length of the nut.
Lead Screw Nuts Nuts Lead Screw
P.03-077 P.03-077
Lead Screw Supports Supports Lead Screw
P.03-079 P.03-079
Lead Screw Stop Plates / Position Indicators Position Indicators Lead Screw Stop Plates /
P.03-081 P.03-081
03-029 Precision Ball Screws 03-030