Page 554 - MiSUMi 2025

Economy series Technical Calculation Technical Calculation Economy series
Cable Carriers Cable Carriers
Cable Carriers

QWhat is the Cable Carriers?
P.05-006 · It can prevent the cable and wire tubes connected to the moving parts of the equipment from twisting, stretching and entanglement due
to movement.
Robot Cables (Machinery Cables) · It is suitable for supporting and guiding multiple cables connected to the linear motion part.
· MISUMI Cable Carriers can be simply ordered by specifying the applicable single type and no need to select the part numbers for the
link and mounting bracket separately.

P.05-015 QCable Carrier Selection
Step 1. Tentatively select Cable Carriers type
Network Cables / Cables for Signals Step 2. Select Cable Carriers size If required sizes are not available, select a different

P.05-021 Step 3. Calculate free span length type of Cable Carriers.
Heat Shrink Tubes / Fans Step 4. Calculate the required number of links

P.05-025 Selection completed
Network Communication / Switching Hubs Please tentatively select types referring to the following features, open-close methods and sizes. Flap Open-Close System
Step 1. Tentatively select Cable Carriers type
Features
Type
P.05-035 Insert the cable into the opening.
Slit Type Cables/hoses can be easily inserted in from both external and
internal circumference sides.
C-MSU
Other New Products C-MSD Low noise featuring internal noise reduction structure

P.05-040 Flap Closed Type Space-saving design enables protection and guide even for only Flaps do not open.
one cable/hose.
5 C-MHF Closed type, stronger resistance to twisting Flaps open from either right or left.
Cable Carriers / Cables / Heat Shrink Tubes / Fans / Network & Communication Flap Open-Close Type The cover can be opened and closed on the left and right.

C-MPU
Open along the inner or outer side of the bending radius
Low noise featuring internal noise reduction structure
C-MPD

Step 2. Select Cable Carriers size <Selection Examples>
Select suitable Cable Carriers size for housing cables/hoses. One φ20mm cable needs to be stored.
20/0.8=25 or more inner height is required
for the condition that the cable O.D. must be
within 80% of inner height.
<Size Selection Tips>
1Height
O.D. of the cable / hose must be 80% or less than the inner height of the Cable Carriers.
100% 80% d 2Occupied Space
Cable / hose must be within 60% of Cable Carrier inner Content = inner Height × inner Width. (In addition, for
MPSPS, up to 70% of the Cable Carriers inner can be taken up.)
3Bending Radius
Above 10% of d Above 10% of d When use different types of cables/hoses together, please select the Cable Carriers bending radius to meet the
maximum bending radius.
* For sectional dimensions and bending 4Distance Between the Running Cable/Hose and inner Wall
The distance between the running cable/hose and Cable Carrier inner wall must be at least 10% of the running
radius by type and size, please refer to cable / hose O.D.
product pages. 5 Cable / Hose Mutual Distances
The distance between adjacent cables/hoses must be at least 10% of the biggest cable O.D..

05-007