Page 726 - MiSUMi 2025

7 Closed End Belts, HTD 3M/5M/8M / STD S3M/S5M/S8M 7

Timing Pulleys & Idlers & Belts / Round Belt Pulleys & Idlers & Belts Products Types 1Main Body 2Core Wire 3Fabric cover Round Belt Pulleys & Idlers & Belts Timing Pulleys & Idlers & Belts /

New
M Material
-
Standard Type
Tooth Surface Cloth Lined Urethane (White) Steel wire Nylon Fabric
Back side Cloth Lined
Timing Pulleys Both Sides Cloth Lined (Green) Pulleys Timing

P.07-007 P.07-007

Idlers H3M/H5M/H8M Idlers

Standard Type Both Sides Cloth Lined
P.07-033 Bonded Area Pitch 1 1 PitchPitch P.07-033
1
PitchPitch
Timing Belts 2 i i h i H 1 1 i i Timing Belts

H
3 3
P.07-055 2 2 θ θ h H h 2 2 h h H H P.07-055
Round Belt Pulleys & Idlers & Belts S3M/S5M/S8M Standard Type Both Sides Cloth Lined Idlers & Belts Round Belt Pulleys &

P.07-088 Bonded Area 2 Pitch 1 2 3 Pitch 1 P.07-088

Ra i H Ra i H
h h
3
Unit weight Unit weight
Belt Type Pitch H h i g/m (Width: 10mm) Belt Type Pitch Ra H h i g/m (Width: 10mm)
Standard Type Standard Type
H3M 3 2.2 1.13 1.07 27 S3M 3 1.95 2.2 1.13 1.07 25
H5M 5 3.7 2.2 1.5 38 S5M 5 3.25 3.4 1.91 1.49 39
H8M 8 5.8 3.4 2.4 61 S8M 8 5.2 5.2 3.05 2.15 51
E Urethane belts may change color over time, but strength, etc. will not be affected. E Urethane belts may change color over time, but strength, etc. will not be affected.
E For steel core wires, avoid tensioning from the back side. E For steel core wires, avoid tensioning from the back side.
E Operating temperature -20°C to 60°C. E Operating temperature -20°C to 60°C.
E Total length is (number of teeth×pitch). E Total length is (number of teeth×pitch).
E Weight is a theoretical value, which may be different from that of the actual product. X This product is not suitable for non-backlash timing pulleys.
E Weight is a theoretical value, which may be different from that of the actual product.
4Number of Teeth
1Type 2Belt Type 3Nominal Width Lower ~ Upper Limit Belt Width (mm) Allowable tension (N)
060 6 48
090 9 79
H3M 160~10000
120 12 94
150 15 118
090 9 288
H5M 150 104~10000 15 439
E-LLTBJ 250 25 800
(Standard Type) 200 20 550
E-LLTBH H8M 250 65~10000 25 1018
(Tooth Surface Cloth Lined) 300 30 1221
400
40
1750
E-LLTBN 060 6 48
(Back side Cloth Lined) S3M 100 160~10000 10 79
E-LLTBR 150 15 118
(Both Sides Cloth Lined) 100 10 288
S5M 150 96~10000 15 439
250 25 800
150 15 550
250 25 1018
S8M 65~10000
300 30 1221
400 40 1750
Ekgf=N×0.101972
Ordering 1Type 2Belt Type · 3Nominal Width 4Number of Teeth
Example E-LLTBJ - H3M060 - 160
07-087 Timing Belts