Page 900 - MiSUMi 2025

Economy series Backlit Conveyor Motorless and Beltless Conveyors Economy series
Conveyors
Conveyors
Conveyors

P.11-007 Basic Features of Light Sources About Motorless and Beltless Conveyors
Cable Length Standard length 485±15mm, available with 1/2/3m extension cable
Flat Belt Pulleys / Flat Belts Substances Description Red R 620-630nm Blue B 465-475nm MISUMI also provides motorless and beltless Conveyors, which can be selected and
The substances contained are RoHS-compliant
Wavelength Range
purchased on each product page.
White W
Green G
0-40°C
Operating Environment
P.11-071 Storage Environment Temperature 515-530nm Humidity 6000-100000K (color temperature) For motorless or beltless Conveyors, MISUMI only guarantees the performance of
20-85%RH (no condensation)
-20-60°C
Urethane Molded Rollers / Urethane Molded Bearings / Guide Rollers (Attenuation: 50%) Red R More than 60,000 hours of continuous operation at 50% illumination (Attenuation: 50%) Suitable for use with Rsee series controllers individual parts.
Expected Lifetime
to prolong the service life of light sources
White W
More than 30,000 hours of continuous operation at 50% illumination (Attenuation: 50%)
when stroboscopic flash control is applied
The performance of Conveyors assembled by the customer is not covered by the warranty
P.11-085 Light Source on Parallel Surface 4-φ3.2 Through Hole T W Width F Length T Thickness policy.
19
50
115
50
100
20
W (Luminous Area)
Ball Rollers / Cam Followers 4 100 100 19 Motorless Conveyors
150
19
P.11-097 135 125 115 F (Luminous Area) 150 200 19 Motorless Conveyors are delivered unassembled. (See the
19
250
figure on the right.) When assembling the motor, please refer
Silicon Bearings / Bearings with Screw / Roller Carriers 200 250 19 When mounting the motor, the dimensions of peripheral parts
200
23
to the assembly instructions attached.
250
depend on the motor output specified during selection.
24
P.11-119 500 250 300 24 Please check the motor size in use to make adjustment
accordingly and note the following:
22
300
300
Placon Rollers / Free Rollers / Sprocket Rollers EThe dimensions shown above are 100×100. For more specifications, please consult MISUMI. 400 24 1Motor mounting pitch
2Clearance between motor shaft and motor cover
P.11-125 Illustration of Lighting for Conveyor Illumination 3Diameter and mounting position of timing belt pulley
11 4Type of timing belt
Conveyors / Flat Belts / Rollers / Cam Followers Ultra-thin, translucent For detailed specifications of each part, please search for the Conveyor part for confirmation.
Before running a Conveyor, be sure to tighten all screws and make meandering adjustment of the belt.
Beltless Conveyors
Pictures of Lighting Effect (Reference Examples) Conveyors installed with a motor and no belt are delivered
without belts. (See the figure on the right.)
Before running a Conveyor, be sure to make meandering
adjustment of the belt.

Performance Description of Translucent Flat Belts
Belt Specification Definition of M Material Number of Thickness Applicable Applicable Load Temperature
Color Optional Translucency Roller Diameter Resistance
Code Belt Performance Properties Conveying Surface Roller Surface Layers (mm) (mm) (Reference Value: KG) (°C) Precautions for Conveyors
K9 Visual purpose White (Glossy surface) Default 60%~85% (Non purely transparent) PU Polyester canvas Single layer 0.9 φ20~50 0~15 0~80
EThe standard dimmer is dual-channel, with a power supply voltage of AC220V. Extension cables can be customized, typically not exceeding 3 meters. Beyond · A Conveyor with no belt is a standard Conveyor with its belt removed.
3 meters, signal control attenuation and other special conditions may occur.
· A Conveyor with no motor and no gearhead is a standard Conveyor with its motor and gearhead removed.
· When a beltless or motorless (no gearhead) Conveyor is selected, it will be delivered unassembled. Since
the motor is not assembled and adjusted by MISUMI, there is no guarantee for the functions after assembly.
· The product has been commissioned for belt meandering before leaving the factory. After it is delivered,
please make adjustments according to the actual situation after a period of operation.
11-017 11-018