Page 901 - MiSUMi 2025

Economy series Backlit Conveyor Motorless and Beltless Conveyors Economy series
Conveyors Conveyors Conveyors

Basic Features of Light Sources P.11-007
Cable Length Standard length 485±15mm, available with 1/2/3m extension cable About Motorless and Beltless Conveyors
Substances Description The substances contained are RoHS-compliant
Red R 620-630nm Blue B 465-475nm MISUMI also provides motorless and beltless Conveyors, which can be selected and Flat Belts Flat Belt Pulleys /
Wavelength Range
Green G 515-530nm White W 6000-100000K (color temperature) purchased on each product page.
Operating Environment 0-40°C P.11-071
Temperature Humidity 20-85%RH (no condensation)
Storage Environment -20-60°C For motorless or beltless Conveyors, MISUMI only guarantees the performance of
Expected Lifetime Red R More than 60,000 hours of continuous operation at 50% illumination (Attenuation: 50%) Suitable for use with Rsee series controllers individual parts.
to prolong the service life of light sources
(Attenuation: 50%) White W More than 30,000 hours of continuous operation at 50% illumination (Attenuation: 50%) when stroboscopic flash control is applied The performance of Conveyors assembled by the customer is not covered by the warranty Guide Rollers Urethane Molded Bearings / Urethane Molded Rollers /
Light Source on Parallel Surface W Width F Length T Thickness policy.
115 50 50 19 P.11-085
W (Luminous Area) 4-φ3.2 Through Hole T 4 100 20
100 19
100 150 19 Motorless Conveyors Cam Followers Ball Rollers /
135 125 115 F (Luminous Area) 150 200 19 Motorless Conveyors are delivered unassembled. (See the P.11-097
19
250
figure on the right.) When assembling the motor, please refer
200
23
200
When mounting the motor, the dimensions of peripheral parts
250 19 to the assembly instructions attached. with Screw / Roller Carriers Silicon Bearings / Bearings
250 24 depend on the motor output specified during selection.
250
300 24 Please check the motor size in use to make adjustment
300 22 accordingly and note the following: P.11-119
500
300
400 24
EThe dimensions shown above are 100×100. For more specifications, please consult MISUMI. 1Motor mounting pitch Sprocket Rollers Placon Rollers / Free Rollers /
2Clearance between motor shaft and motor cover
Illustration of Lighting for Conveyor Illumination 3Diameter and mounting position of timing belt pulley P.11-125
4Type of timing belt 11
For detailed specifications of each part, please search for the Conveyor part for confirmation.
Ultra-thin, translucent Before running a Conveyor, be sure to tighten all screws and make meandering adjustment of the belt. Rollers / Cam Followers Conveyors / Flat Belts /

Beltless Conveyors

Pictures of Lighting Effect (Reference Examples) Conveyors installed with a motor and no belt are delivered
without belts. (See the figure on the right.)
Before running a Conveyor, be sure to make meandering
adjustment of the belt.

Performance Description of Translucent Flat Belts
Belt Specification Definition of M Material Number of Thickness Applicable Applicable Load Temperature
Color Optional Translucency Roller Diameter Resistance
Code Belt Performance Properties Conveying Surface Roller Surface Layers (mm) (mm) (Reference Value: KG) (°C) Precautions for Conveyors
K9 Visual purpose White (Glossy surface) Default 60%~85% (Non purely transparent) PU Polyester canvas Single layer 0.9 φ20~50 0~15 0~80
EThe standard dimmer is dual-channel, with a power supply voltage of AC220V. Extension cables can be customized, typically not exceeding 3 meters. Beyond · A Conveyor with no belt is a standard Conveyor with its belt removed.
3 meters, signal control attenuation and other special conditions may occur.
· A Conveyor with no motor and no gearhead is a standard Conveyor with its motor and gearhead removed.
· When a beltless or motorless (no gearhead) Conveyor is selected, it will be delivered unassembled. Since
the motor is not assembled and adjusted by MISUMI, there is no guarantee for the functions after assembly.
· The product has been commissioned for belt meandering before leaving the factory. After it is delivered,
please make adjustments according to the actual situation after a period of operation.
11-017 11-018