Page 927 - MiSUMi 2025

2B 3L 4Number of 5H Motor Selection Conveyors
1Part 9Belt P.11-007
Number 10mm 5mm Ribs Ribs 6Output 7Specification 8Gearhead Specification Motor
increments increments 1mm Increments Height (W) Reduction Ratio
SCM
10 (Single-phase 220V 5 7.5 10 12.5 H20 G Flat Belts Flat Belt Pulleys /
5~100 20 Variable Speed Motor) 15 18 25 30 (General (GPG
E-CVDSA 30 36 50 60 75 Purpose· Motor)
(With Note: 40 25 INV 90 100 120 Green PVC) J P.11-071
Meandering 50~300 350~2000 Number of 50 40 (3-Phase 220V 150 180 F15 (JSCC
Prevention Ribs 60 Induction Motor) (For Food· Motor)
Crosspieces) ≤ Note: White PU)
(2L+160)/50 T=5 Ribs NM NH J R Guide Rollers Urethane Molded Bearings / Urethane Molded Rollers /
Thickness (No Motor) (No Gearhead) (No Belt) (No Motor,
Gearhead)
EBelt thickness is a nominal value and the actual thickness is one-tenth of the nominal value, measured in millimeters, except for D9. P.11-085
EIf a stepper motor or servo motor is required for automatic control, the type with no motor and gearhead can be selected.
EWhen "No motor, gearhead" is selected, the motor mounting hole pitch will vary depending on the motor's power rating.
E When "No motor, gearhead" is selected, the main unit will be delivered unassembled. The customer should assemble the main unit by Cam Followers Ball Rollers /
following instructions on the included assembly procedure manual.
Ordering 1Part 4Number Motor Selection 9Belt P.11-097
Example Number - 2B - 3L - of Ribs - 5H - 6Output - 7Specification - 8Gearhead Reduction Ratio - Specification - Motor
E-CVDSA - 200 - 1000 - 50 - 20 - 25 - SCM - 25 - H20 - G
For No Belt E-CVDSA - 200 - 1000 - 50 - 20 - 25 - INV - 25 - J - G with Screw / Roller Carriers Silicon Bearings / Bearings
For No Motor, E-CVDSA - 200 - 1000 - 50 - 20 - 25 - NM - NH - H20 - R
Gearhead
Ordering 1Part 4Number Motor Selection 9Belt
Example - 2B - 3L - - 5H - - - Motor - Alteration P.11-119
Alterations Number of Ribs 6Output - 7Specification - 8Gearhead Reduction Ratio Specification
E-CVDSA - 200 - 1000 - 50 - 20 - 25 - SCM - 25 - H20 - G - MK
Alterations Code Spec. Sprocket Rollers Placon Rollers / Free Rollers /
Motor Position Reversed
Motor Transfer Direction The motor position can be changed. P.11-125
MK Ordering Code MK 11
Can only be designated for the head drive type.
Motor
Mounting Bracket for Speed Controller
Mounting bracket for speed controller is Rollers / Cam Followers Conveyors / Flat Belts /
SCB included.
Ordering Code SCB

QConveying Capacity QGearhead Reduction Ratio - Speed Correspondence Table
E May decrease depending on load condition. *Reference value
Gearhead Flat Belt Speed (m/min)
Reduction Ratio SCM Variable Speed INV Induction Motor
Motor
Transfer Weight (Unit/Kg) 12.5 20.3~33.9 42.2
63.3
30.5~50.9
5
7.5
15.3~25.4
31.7
10
25.3
12.2~20.3
10.2~17.0
15
21.1
18
25
12.7
6.1~10.2
10.6
30 8.5~14.1 17.6
5.1~8.5
36 4.2~7.1 8.8
50 3.1~5.1 6.3
60 2.5~4.2 5.3
Flat Belt Speed (m/min) 75 2.0~3.4 4.2
E This graph shows conveying capacity 90 1.7~2.8 3.5
with horizontal conditions.
E Conveying capacity varies depending on 100 1.5~2.5 3.2
usage conditions. 120 1.3~2.1 2.6
E When a variable speed motor is selected, 150 1.0~1.7 2.1
the conveying capacity will not increase 180 0.8~1.4 1.8
as the speed decreases.
11-043 Conveyors 11-044