Page 1124 - MiSUMi 2025

2-Axis Motorized Goniometer Stages, Ball Screw Type

M Material
Locating Pins Aluminum Alloy S Surface Treatment Pins Locating
Black Anodized

P.12-009 P.12-009
Bushings For Locating Pins Locating Pins Bushings For

P.12-053 P.12-053
Adjusting Bolts / Adjusting Stopper Screws / Clamping Screws E-GMPWG Clamping Screws Adjusting Stopper Screws / Adjusting Bolts /

P.12-061 2-φ3H7 Depth 4 59.5 3H7 Depth 3 P.12-061
4-M4 Depth 6
Polyurethane Pushers (134.5) 1 Pushers Polyurethane

P.12-069 32 50 60 32 P.12-069
Micrometer Heads 59.5 (136.5) 50 11.5 9.5 φ3H7 Depth 2 (Bottom Diagram) Heads Micrometer

60
P.12-073 E-GMPWG60-50 E-GMPWG60-75 E-GMPWG60-100 Center of Rotation P.12-073
Positioning Stages Center of Rotation Stages Positioning

P.12-075 Center of Rotation P.12-075
100
Other New Products 50 75 Products Other New

P.12-115 P.12-115
12 4 50 4 50 4 50 12

Locating Pins & Bushings / Position Adjustment Parts / Positioning Stages Part Number #50 φ8 Counterbored Hole #50 Mechanical Specification #50 4-4.5 Through Hole, Adjustment Parts / Positioning Stages Locating Pins & Bushings / Position
3.7
3.7
3.7
4-4.5 Through Hole,
4-4.5 Through Hole,
φ8 Counterbored Hole
φ8 Counterbored Hole
Accuracy
Specification
Repetitive
Height of
Load
Stage
Position
(°/sec)
1Type 2No. 3Sensor 4Driver 5Cable Surface Travel Distance (°) Capacity Rotation Mass Maximum Speed Positioning
(mm) Upper / Lower Axis (N) Center (mm) (kg) Upper / Lower Axis Accuracy
A
60-50 (include 2 ±9°/±5.5° 50±0.4 10.5/7
L motor (2m
E-GMPWG 60-75 (forward) driver) cable) 60×60 ±5.5°/±5° 44.1 75±0.4 1.0 7/5.5 Within
±0.01°
4
R
(reverse) N (4m
60-100 (no cable) ±5°/±4° 100±0.4 5.5/4.5
driver)
EDrivers: The driver model used in this series: E-DR42B.
ECables: The cable models used in this series: HRS12-2M (2m) / HRS12-4M (4m).
E Load indicated in the specification table is the load at the center when the stage is placed horizontally;
if placed vertically, the load is reduced by half.
Ordering Part Number (1Type · 2No.) - 3Sensor Position - 4Driver - 5Cable
Example E-GMPWG60-50 - L - A - 2
*The position of the sensor cover is L in the figure above.
12-113 Positioning Stages 12-114