Page 1490 - MiSUMi 2025

Heptagonal Knobs Female Thread /

Star Knobs / Octagonal Knobs Product Overview Economy series
Slide Rails

QHeptagonal Knobs
M Material
Knob Body Threaded Part Main Body Color Economy series
Phenolic Resin Brass (Insert) Black
Slide Rails MISUMI LOGO Engraving
Quality Assurance
Smooth sliding and durable
Lf Part Number
2M D D1 H h Lf d
1Type 2Thread M New product with tap for
6 25 16 20 9 12 8 easy installation
9
8
21 D1 d C-NLZT 10 32 18 26 13 20 11 21
14
22
29
40
20
Handles / Hinges / Door Parts / Slide Rails / LED / Signal Towers D h H Ordering Part Number (1Type · 2M) 32 15 25 15 QDurability Test QSalt Spray Test Slide Rails / LED / Signal Towers Handles / Hinges / Door Parts /
12
50
29
Example
C-NLZT6
with high-quality self-made mold, and the
QStar Knobs / Octagonal Knobs · MISUMI Economy series Slide Rails are stamped · MISUMI Economy series
Body Thread assembly accuracy of finished products is Slide Rails (steel) ensures 24
Handles Type Threaded Part Material Material S Surface movement with load, it can still be used normally in rusting and excellent rust Handles
hours salt spray test without
guaranteed. After 50,000 cycles of reciprocating
M
M
Treatment
C-NLZTM Threaded Type Q235 White Zinc Plating smooth sliding without deformation in appearance. prevention performance.
P.21-008 C-NLZTF Threaded Type Phenolic Brass White Zinc Plating Test Conditions: Install the sample correctly on the durability tester, load 24.5KG Test time (H) Generic products on the market * MISUMI Economy series P.21-008
-
Tapped Type
in the drawer, make continuous pushing and pulling movement with a speed of
Hinges / Magnetic Catches Star Knobs C-NBJF Tapped Type Phenolic Brass - product when the corresponding number of cycles is reached. 24 Black spots appear in one place 2% black spots at the inner rail Catches Hinges / Magnetic
12 cycles/minute, observe the change of the sample and record the state of the
C-NBJM
Q235
Normal
Number of cycles Sliding resistance
Sag when fully extended
10% black spots at the inner rail
48
0.8KG
10000
1mm
0.7KG
1mm
30000
P.21-017 Octagonal Knobs 20000* 0.8KG 1mm 72 Large area of rust at the outer rail 3% black spots at the outer rail P.21-017
C-NLZTM (Threaded Type) C-NLZTF (Tapped Type) Lf 40000 0.7KG 1.2mm 96 Large area of red rust inside the Black spots inside the slide
rail with steel ball rusted
slide rail with steel ball rusted
1.2mm
50000
0.7KG
Locks 2M * With opening and closing every ten minutes, 20000 cycles is about equal to the * Generic products on the market are similar products randomly purchased Locks
by MISUMI from the market
number of uses in a year.
* The test data are obtained through testing by MISUMI, which are for reference * The test data are obtained through testing by MISUMI, which are for
P.21-032 D1 2M D1 only reference only P.21-032
QInstallation Precautions
Knobs D 3L h H D h H Process Hole Sectional Sectional View Knobs
View of with Tap
C-NBJM (Threaded Type) C-NBJF (Tapped Type)
P.21-042 Lf Outer Rail Mounting Hole Normal Type Accessories P.21-042
2M Accessories Required:
Slide Rails D1 2M D1 When installing the interference part between the Screw + Nut Slide Rails
Screw
Required:
Slide Rails and the mounting hole, please move the
process hole to a position above the mounting hole
before installing the screws.
P.21-050 QPrecautions for use P.21-050
LED Lights / Multi-layer Signal Lights D 3L h H D h H · Example of installation direction · Slide Rails when ball creep occurs Slide Rail Multi-layer Signal Lights LED Lights /
Offset due
Outer
to ball creep
Retainer
Inner Slide Rail
P.21-060 QThreaded Type 3Length L D D1 H h QTapped Type Lf D D1 H h When normal P.21-060
Part Number
Part Number
When creeping
Selection
2Thread M
Other New Products C-NLZTM 10 10 15 25 16 20 13 C-NLZTF 10 12 25 16 20 13 Vertical and parallel installation Slide Rails are not mounted vertically Because of the offset, the retainer has reached the left end of the outer slide Products Other New
1Type
2Thread M
1Type
9
6
6
9
10 15
32
rail, but it is not in the full stroke state.
18
8
18
16
8
26
32
26
14
28
14
In order to eliminate the ball creep phenomenon, please apply force to make
28
22
15 20
40
40
22
18
the inner Slide Rails slide to the full stroke state.
P.21-071 C-NBJM 10 15 25 40 21 25 14 C-NBJF 12 25 50 29 32 15 Action P.21-071
10
25
25
50
12
17
15
21
40
14
25
Direction
Ordering Part Number (1Type · 2M) - 3L 12 21 50 25 Apply force to the far center of gravity Direction 〃 Force Action Force Force
Direction
Direction
Direction
Example C-NLZTM6 - 15 Slide Rails are not on the same horizontal line when it is installed horizontally
* It is recommended not to use it when torque loads are applied 〃
21-049 Knobs Before pulling out After pulling out 21-050