Page 695 - MiSUMi 2025

7 Economy series Product Overview Product Overview Economy series 7

Timing Pulleys & Idlers & Belts / Round Belt Pulleys & Idlers & Belts QHTD Excellent Tooth Profile Round Belt Pulleys & Idlers & Belts Timing Pulleys & Idlers & Belts /
Timing Belts
Timing Belts

MISUMI HTD specification timing pulley and timing belt have small tooth profile engagement clearance and
Specs
Timing Pulleys Economy series New high positioning accuracy. Generic products on the market* MISUMI Economy series Pulleys Timing
Timing Belts
Tooth Profile: HTD5M
Belt Belt
P.07-007 Engagement Test of Timing P.07-007
Newly Added HTD Circular Tooth Profile Timing Belts Pulley and Timing Belt Pulley Pulley
Idlers MISUMI Economy series Timing Belts Clearance Large Small Idlers

include: S Tooth Profile, HTD Tooth Profile, Positioning Accuracy Poor Excellent
P.07-033 MXL / XL / L / H Tooth Profile, T Tooth Profile * Generic products on the market are similar products randomly purchased by MISUMI from the market P.07-033
Timing Belts QTension Test of MISUMI Economy series HTD Timing Belts Timing Belts

P.07-055 Tensile Strength Test Tooth Cloth Adhesive Strength Test P.07-055
Round Belt Pulleys & Idlers & Belts QProduct Overview Idlers & Belts Round Belt Pulleys &

Timing Pulleys and Timing Belts are widely used to design mechanisms for transmitting rotational power generated by motors.
P.07-088 Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts. P.07-088
QProduct Features

Tooth Profile Tooth Shape Types Features Product Features
Feature 1: Reasonable semi-circular arc tooth
profile design can provide higher torque to
S2M / S3M adapt to high load transmission.
S5M / S8M High Torque Transmission Feature 2: Tooth peak changes little under
force, improving service life.
Circular Tooth
Feature 1: The arc tooth profile has higher
H3M / H5M Positioning Accuracy transmission power than the trapezoidal tooth. Test Item GB Standard Generic products on the market* 1 MISUMI Economy series
H8M Feature 2: Timing Pulleys and Timing Belts Tensile Strength (N/mm) Above 160 264 284
have small engagement clearance and high
positioning accuracy.
Tooth Cloth Adhesive Strength (N/mm) Above 6 14 16
MXL / XL / L / H Standard Torque Transmission
Tooth rubber uses chloroprene to protect core *1 Generic products on the market are similar products randomly purchased by MISUMI from the market
Trapezoidal Tooth wire, providing excellent bending fatigue * The above data is limited to sample test results and obtained by MISUMI, which is for reference only
Light Load Transmission· resistance, heat resistance, oil resistance
T5 / T10 Standard Torque Transmission
QFeatures of Rubber Timing Belt
QExample of Use
Tooth Cloth · The rubber timing belt is composed of rubber,
Instructions for Use of Timing Instructions for Use of Timing
Usage Method Example Drawing Usage Method Example Drawing core wire and tooth cloth.
Pulley and Timing Belt Pulley and Timing Belt · It can be widely used as a general industrial product.
Rubber
· Have certain conductivity.
· Operating Temperature Range Economy series: 0°C to 90°C
1Driving (The driven wheel is 3Conveyance (Plates are
driven by the driving wheel for conveyed by two timing
transmission) toothed belts)
Core Wire
QPrecautions for use
2Transmission (Used for repeated 4Traction transmission · Do not bend the belt by force.
motion with the object not rotating (Workpieces are clamped · For steel core wire, please avoid tensioning from the back side.
and high requirements on and transmitted by the belt) · Please avoid using or keeping at extreme high, low temperatures beyond the operating temperature range, or in humid environments.
positioning accuracy) · Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
In particular, do not make oil adhere to the belt, otherwise it will cause the belt to swell, significantly shortening the life of the belt.
· During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
07-056