Page 1270 - MiSUMi 2025

Economy series Product Overview
Strut Clamps

Economy series New
Specs
Strut Clamps

Equal Dia. / Unequal Dia.

One-Touch
Clamping Force

Low price

16 Q Appearance improvement & specification change for medium precision and medium load fixed applications
Posts / Strut Clamps / Angle Plates Appearance
MISUMI Economy series
MISUMI Standard products

H7 / 0.05
Posts I.D. Tolerance / 2 Hole Straight Angle Iron/Aluminum/Stainless Steel 0~+0.05 / General Tolerance
Aluminum
Material
Number of Fastening Bolts φ12 or less: 1pc φ15 or more: 2pcs φ12 or less: 1pc φ15 or more: 2pcs
P.16-005 Q Additional Overcut Process: Stronger Locking Force
Strut Clamps / Brackets Q Clamping Force Test QTest Result

P.16-023 Universal Testing Machine 17%UP 1.17kN
Apply pressure Posts 1.0kN
Angle Plates Strut Clamps Overcut Process Although there is only 1
bolt, the clamping force can
still reach 1.17kN
P.16-031 (Reference Value of Shaft
Dia. 20mm)
* Test Method: Clamp with the specified torque and apply vertical downward pressure to the shaft.
The maximum holding force is the axial load recorded when the shaft is displaced. No overcut With overcut
* Test Conditions: 1 I.D. of measured object: 20mm 2 Clamping torque: 7.54N·m (MISUMI Economy series)
Q Example of Use for Strut Clamps

Q Commonly used in mounting brackets for sensors
Strut Clamps
The strut clamp is used to fix the sensor, and the clamping
force is more important than the accuracy. However, the
Economy series Strut Clamps only uses one bolt but
Sensor
ensures sufficient clamping force, which can be safely used.
Customer
Purpose of supporting sensors/cameras, etc.

16-023