Page 624 - MiSUMi 2025

Economy series Product Overview Product Overview Economy series
Rotary Shafts Rotary Shafts

New
Economy series Products
Rotary Shafts

Rich Variety of Alterations

High-precision Geometric Tolerance

Stepper Motors / Servo Motors QWhat is Rotary Shafts

Rotary Shaft is a shaft used for rotating applications such as transmitting power and conveying objects. It can be used as the shaft of
P.06-005 bearings, pulleys and rollers.
h9 and h7 tolerances are available for easy assembly. Additions of keyway, retaining ring groove, set screw flat and wrench flat
machining are possible. Motor
Couplings Pulley Pulley Coupling Bearing Housing

P.06-025
Keyless Bushings

P.06-034
QHow to Select Rotary Shafts
Rotary Shafts STEP1 Select the bearing support method
I Shaft end shape ~Please select tapped or retaining ring groove, etc. according to the fixing method~
Shape Straight One End Tapped Both Ends Tapped Both Ends Stepped Both Ends Double Stepped Retaining Ring Groove on Both Ends
P.06-037 Shape Drawing
6 Example of Use
Motors / Couplings / Rotary Shafts * See each product page for details of the machining content. P.06-043 P.06-045 P.06-047 P.06-049~P.06-052

Product Catalog Page
P.06-041
P.06-039
STEP2 Select the drive component installation method
I Install and process the drive component such as roller or pulley.
~Please select keyway or set screw flat machining, etc. according to the drive component to be installed~
Drive Addition of Keyway Addition of Set Screw Flat Addition of Retaining
Component Additional keyway at 1 position Additional keyway at 2 positions Addition keyway at shaft end Additional set screw flat at 1 position Additional set screw flat at 2 positions Ring Groove
Alterations d
WFC J V W
KC A WKC C E K PKC QKC FC G m m
H
TA TB
Code KC WKC PKC·QKC FC WFC TA·TB
Specified Increments KC, A=0.1mm increments WKC, C, K, E=0.1mm increments PKC, QKC=0.1mm increments FC, G=1mm increments WFC, J, W, V=1mm increments TA, TB=0.1mm increments
Ordering Code Example KC50-A10 WKC50-C8-K40-E10 PKC10·QKC15 FC10-G3 WFC10-J3-W10-V3 TA10-TB10
EFor some specifications, TA, TB=1mm increments
STEP3 Shaft end alterations
Addition of Wrench Flat Addition of Slit Cam Groove Change L Dimension Tolerance Change Male Threads to Left-hand Threads Change Male Threads to Fine Threads
QMC (Fine Thread)
Alterations SC l2 UC l1 PMC (Fine Thread)
LKC PLM QLM
W d
Code SC UC LKC PLM·QLM PMC·QMC
Specified Increments SC=1mm increments UC=1mm increments - - -
06-037 Ordering Code Example SC10 UC10 LKC PLM(QLM) PMC20(QMC16)